trials
trials
trials
trials
This tool provides reference values only and is not medical advice. Results should not replace consultation with a qualified health professional. Learn about our health content standards.
Quick answer

Enter the number of correct (independent), prompted, incorrect, and no-response trials from a DTT session. The calculator returns percent independent correct, percent with prompts, and whether the session meets your mastery criterion. Switch to "Across sessions" to track consecutive mastery across multiple sessions.

Key takeaways
  • % Independent correct = independent correct trials / total trials x 100. Prompted trials never count toward mastery.
  • The most common mastery criterion in ABA is 80% independent correct across 3 consecutive sessions (Cooper et al., 2020).
  • Prompt dependency - when high prompted % persists alongside low independent % - is the most common sign a program needs prompt-fading adjustments.
  • Discrete-trial teaching is a mandated BCBA competency in the BACB 5th Edition Task List (2022), reflecting its foundational role across early intensive ABA programs.

How to use this DTT data calculator

Select Single session and enter your trial counts - correct, prompted, incorrect, and no response - from your data sheet. The mastery slider defaults to 80%; adjust it to match your program's criterion. The result shows percent independent correct and mastery status instantly.

For tracking progress over time, switch to Across sessions. Enter C/P/I/NR counts for each session and set the consecutive sessions required. The calculator shows a session-by-session table and tells you exactly when - or if - mastery has been achieved.

What is Discrete Trial Training and why does data matter?

Discrete Trial Training (DTT) is a structured teaching method used in Applied Behavior Analysis (ABA): each trial presents a clear antecedent (the discriminative stimulus, or SD), waits for a response, and delivers a consequence.

A 2001 review in Focus on Autism and Other Developmental Disabilities (Smith) confirmed DTT as one of the most evidence-based techniques for teaching skills to children with autism spectrum disorder.

Data recording transforms DTT from a teaching activity into a clinical science. Without accurate trial-by-trial data, a team cannot tell whether a learner is acquiring the skill independently or only responding because a prompt is present.

The percent correct calculation is the first analysis every BCBA performs after reviewing a session's data sheet.

DTT explained to a curious beginner

Think of DTT like a spelling test where the teacher gives one word at a time and records whether the student spells it correctly, needs a hint (prompted), gets it wrong, or doesn't answer.

After 10 words, you count how many the student spelled correctly without any hints. If a student scores 8/10 without hints, that's 80% independent - most ABA programs require this across 3 tests in a row before moving on to harder words.

What do the four trial response types mean?

Four response types are standard in DTT data recording across ABA programs, as defined in Cooper et al. (2020). Recording all four gives a complete picture of acquisition - most DTT apps and paper data sheets use these exact categories.

CodeResponse typeDefinitionCounts toward mastery?
CCorrect (independent)Learner responds to the SD without any prompt, within the response intervalYes
PPromptedLearner responds correctly only after a prompt was deliveredNo
IIncorrectLearner emits a wrong response to the SDNo
NRNo responseLearner does not respond within the defined response intervalNo

Some programs also record "self-correction" (SC) when a learner initially responds incorrectly then corrects without prompting. Whether SC counts as correct varies by program - check your behavior plan before entering data.

What mastery criteria do BCBAs use in DTT programs?

The most common mastery criterion in published ABA programs is 80% independent correct across 3 consecutive sessions, as cited throughout Cooper et al. (2020) and in the BACB 5th Edition Task List (2022). Some programs use stricter criteria - especially for safety skills or foundational language. The same 80%/3-session standard applies to IEP goal progress in school-based special education programs.

Criterion% correctConsecutive sessionsTypical use case
Standard80%3Most academic, play, and adaptive skills
Stringent90%2Communication, safety skills, generalization targets
High reliability100%2-3Safety behaviors (e.g., stop at the curb)
Flexible80%2Quickly progressing learners on massed practice programs

In every behavior plan I write, I set the mastery criterion before data collection begins - never after reviewing the data. Setting criteria post-hoc introduces bias into program decisions and undermines the analytic integrity of the program.

Why should prompted trials never count toward mastery?

Including prompted responses in the percent correct figure is one of the most consequential data recording errors in ABA practice.

Cooper et al. (2020) are explicit: the goal of DTT is independent responding to the SD, not prompted responding.

A learner who answers 10/10 trials correctly but needs a prompt on 7 of them has not acquired the skill - they have learned to wait for assistance.

This matters clinically because advancing a program prematurely based on inflated data wastes instructional time and can teach prompt dependency.

This calculator shows both figures - % independent and % with prompts counted - so you can see the gap and decide whether prompt fading needs to be adjusted.

$$\text{\% Correct} = \frac{\text{Independent correct}}{\text{Total trials}} \times 100$$

$$\text{\% With prompts} = \frac{\text{Correct} + \text{Prompted}}{\text{Total trials}} \times 100$$

Worked example

8 correct, 2 prompted, 3 incorrect, 2 NR = 15 total. % independent = 8/15 = 53.3%. % with prompts = 10/15 = 66.7%. The 13-point gap signals that prompt fading may need adjustment before this learner can reach the 80% mastery criterion independently.

When I supervise behavior technicians and I see a consistent gap of more than 20 percentage points between % with prompts and % independent across sessions, I treat that as a prompt dependency flag.

It tells me prompts are being delivered too quickly or the prompt hierarchy isn't being faded. I'll typically request a video of one session before the next supervision meeting so I can observe the timing directly.

How do you track mastery across DTT sessions?

Consecutive session mastery is the standard method for determining skill acquisition in ABA programs. A single high-scoring session can reflect chance, fatigue effects, or a particularly attentive learner that day. Three consecutive sessions at or above the criterion provides enough evidence that the skill is stable.

The ABA behavior rate calculator handles the within-session measurement; this calculator handles the across-session mastery decision. For skills that are tracked inside an IEP goal mastery tracking framework, the IEP calculator adds goal-period elapsed time and projected mastery date.

Enter each session's C/P/I/NR counts in the "Across sessions" mode. The table shows each session's % correct and whether the criterion was met. The result card updates instantly and identifies the session at which mastery was first achieved - or shows how close the learner is to the consecutive streak required.

I use this calculator daily to track mastery across sessions and ensure that learners are truly acquiring skills independently. I love it!

What are the most common DTT data recording mistakes?

Data quality determines program quality. The errors below appear in the ABA supervision literature (Cooper et al., 2020) and show up regularly in RBT data review. Each error produces numbers that look valid but lead to wrong clinical decisions.

MistakeWhat goes wrongFix
Recording prompted as correctInflates % correct; learner advances prematurelyAlways record prompted (P) separately from correct (C)
Averaging sessions instead of requiring consecutiveA bad session hidden by averaging; mastery declared too earlyRequire N consecutive sessions - no averaging
Inconsistent response intervalSome technicians wait 5 seconds, others 3 - NR rate varies by staffDefine response interval in the behavior plan and train all staff
Recording after the session from memoryRecency bias; miscount of trialsRecord each trial immediately on the data sheet during the session
Changing criteria mid-programMastery becomes a moving target; data comparability lostSet mastery criterion before data collection begins

Frequently asked questions about DTT data

What is percent correct in DTT?

Percent correct in DTT is the number of independent correct trials divided by the total number of trials, multiplied by 100. Only trials the learner completes without any prompt count as independent. Prompted trials are tracked separately and do not count toward mastery.

What is a mastery criterion in ABA?

A mastery criterion is the performance standard a learner must meet before a program is considered complete. The most common standard is 80% independent correct across 3 consecutive sessions. Some programs use 90% across 2 consecutive sessions for skills requiring higher reliability, like communication or safety behaviors.

Should prompted trials count toward percent correct?

No. Prompted trials should be tracked separately and not counted as independent correct. Including prompted responses inflates the score and can lead to advancing a program before the learner truly has the skill. The whole purpose of prompt fading is to reach independent responding.

How many trials per session does DTT require?

Most ABA programs use 10 trials per session as a standard block. Five to 20 trials are common depending on the skill and the learner's endurance. Cooper et al. (2020) note there's no universal rule - trial density should match the learner's response requirements and the skill's complexity.

What is prompt dependency in DTT?

Prompt dependency occurs when a learner waits for a prompt instead of responding to the SD alone. It's caused by prompts delivered too quickly or not faded systematically. It shows up in data as consistently high prompted trials alongside low independent correct percentages - exactly what this calculator's two-line output is designed to reveal.

Test your knowledge

Quiz: how well do you know DTT data?

5 questions · ~2 min

1. A session has 8 correct, 2 prompted, 3 incorrect, 2 NR. What is the % independent correct?

ℹ Total trials = 8 + 2 + 3 + 2 = 15. % independent = 8 / 15 × 100 = 53.3%. Prompted trials do not count toward independent correct - only trials the learner completed without assistance.

2. What does it mean for a learner to "meet mastery" in DTT?

ℹ Mastery in DTT means reaching a preset percentage of independent correct responses (commonly 80% or 90%) across a defined number of consecutive sessions - not just one session. Consecutive sessions prevent false mastery from a lucky run.

3. Why are prompted trials recorded separately from independent correct trials?

ℹ Counting prompted trials as correct inflates the percentage and can lead a team to advance a program before the learner truly has the skill independently. The whole purpose of prompt fading is to reach independent responding, so only independent correct trials should count toward mastery.

4. What is "prompt dependency" in DTT?

ℹ Prompt dependency occurs when a learner learns to wait for the prompt rather than respond to the SD alone. It happens when prompts are delivered too quickly or not faded systematically. The DTT data calculator reveals it: prompted trials stay high while independent correct stays low across sessions.

5. A learner scores 85%, 82%, 79%, 88% across four sessions with an 80% / 3-consecutive mastery criterion. Is mastery achieved?

ℹ Sessions 1 and 2 meet the 80% criterion, but session 3 at 79% breaks the streak. Session 4 restarts the count at 1. Mastery requires three consecutive sessions all at or above 80% - averages and near-misses do not count.

Key terms